Last Modified: 11-29-2007 1.6 A
Service Category: Brake Section: Parking Brake
Model Year: 2008 Model: Sequoia Doc ID: RM000001ED9003X
Title: PARKING BRAKE: PARKING BRAKE PEDAL: REMOVAL (2008 Sequoia)

REMOVAL

1. RELEASE PARKING BRAKE PEDAL

2. REMOVE FRONT DOOR SCUFF PLATE LH INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

3. REMOVE COWL SIDE TRIM BOARD LH INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

4. REMOVE INSTRUMENT SIDE PANEL LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

5. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL (2008 Sequoia)+

6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

7. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

8. DISCONNECT NO. 1 PARKING BRAKE CABLE ASSEMBLY

(a) Remove the lock nut and adjustment nut.

(b) Remove the clip.

(c) Using a screwdriver, slowly bend up the claw.

NOTICE:

Be careful not to damage the No. 1 parking brake cable or claw.

(d) Disconnect the parking brake cable from the parking brake control pedal.

9. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY

(a) Disconnect the connector.

(b) Detach the wire harness clamp from the control pedal.

(c) Remove the 3 nuts and parking brake control pedal from the body.